-
wedi® Building Panels
- The Versatility of wedi® Building Panels
- wedi® Building Panel Applications
- Wall Application in Showers and Wet Areas
- wedi® Building Panels on Tub Walls
- Flush Transitions to Drywall
- wedi® Building Panel Over Wood Subfloor
- wedi® Building Panel Over Concrete Subfloor
- Underfloor Heating Systems
- Countertops
For download:
Imagine your countertops waterproofed and tile ready in just 5 minutes ...
wedi® Building Panels offer a variety of different thicknesses and sizes for countertop applications. The 2’ x 8’ sheets of the 1-1/2” or 2” thick panels are ideal and require no further support in installation.
Apply a continuous 1/2” thick bead of wedi® joint sealant over the spacers of your countertop.
Glue down the wedi® Building Panel after you have cut it to size. Leave it recessed behind the front of the counter so you can apply a strip of wedi® Building Panel to the exposed foam edge as shown in 4 and still finish flush. Apply some weight equally on the surface for 15 minutes so that the wedi® sealant/adhesive can bond properly.
Cut out for the sink using a jigsaw or handsaw.
Apply wedi® joint sealant and a strip wedi® Building Panel in any thickness. This strip’s cementitious coating side will allow you to better set tile.
Wrap the edge with wedi® sealing tape or reinforcing tape.
Apply wedi® joint sealant around the cut out and insert the sink. You can also cut recesses into the wedi® Building Panel to allow for a deeper or close to flush with the tile installation of a sink.
You can tile immediately. The assembly is waterproof and lightweight.
